Power Distribution Busbar

The stock sizes for power distribution busbar match our T2 series. Thickness ranges from 2.7mm to 12mm. Width ranges from 15mm to 125mm. Common specifications include 12×120, 12×100, 10×125, 8×80, 6×60, 5×40, 4×30, and 3×25. The "L" prefix means L-shaped bending. The standard length is 6000mm. We also accept custom cutting to any length. Production follows GB/T5585.1-2026. Copper purity is above 99.90%. Conductivity is not less than 97.3% IACS. Resistivity at 20°C does not exceed 0.0177 Ω·mm²/m. Density is 8.9 g/cm³. Tensile strength ranges from 220 to 260 MPa. Yield strength is above 170 MPa. Hardness falls between 65 and 90 HV. Elongation is not less than 17%.

We use CNC programs to maintain consistent processing accuracy. This gives us good dimensional consistency across all batches. We do visual checks before packaging. Third-party inspection teams are welcome at our factory. Our raw material inventory stays full year-round. We start production immediately after receiving your order. Distribution customers often need fast delivery. We ship standard products within one week. Custom sizes usually take one to two weeks. We allow mixed specifications in one order. The minimum order is 1000 kilograms. Every piece of power distribution busbar we deliver is ready for panel assembly.

This product is used mainly for internal conductive connections in high and low voltage distribution cabinets. It also goes into main busbars and branch busbars in switchgear. Power distribution equipment of all types relies on it. We have supplied many domestic distribution equipment manufacturers steadily. Now we also accept overseas orders through our export channel. After receiving your order, we confirm drawings and installation dimensions with you. During production, you can request workshop photos anytime. Before shipping, we wrap the busbar with bubble film. Long products get wooden pallets. If transport causes deformation or coating wear, we help you file claims with the freight forwarder. If the issue comes from our processing, we refund proportionally based on photos. Choose our power distribution busbar for reliable panel assembly.

The base material meets T2 copper standards for life. We do not offer free samples. Pre-production samples take about one week and require material and processing fees. Bulk orders require 60% advance payment to secure production. The remaining 40% is paid upon shipment with packing photos. We support EXW factory pickup and FOB port delivery. USD, EUR, and CNY are accepted.